Summary
A Grinder in a Chipper Sized Package.
The Vermeer HG200 compact horizontal grinder turns wood chips, construction debris and green waste into a range of usable end products that include ground cover, landscape mulch, animal bedding and compost. The unit provides residential tree care contractors, sawmills, home builders and contractors with an economical alternative to incurring disposal fees or stockpiling unusable chips.
| Hammermill |
| Drum Tip Diameter |
22.3 " |
56.6 cm |
| Rotor Cutting Length |
16.5 " |
41.9 cm |
| Engine |
| Model |
Cummins B3.3 Turbo Charged |
|
| Horsepower |
85 hp |
63.4 kw |
| Drive Line |
| Clutch |
Clutchless PTO |
|
| Infeed System |
| Feed Roller Diameter |
20 " |
50.8 cm |
| Feed Throat Height |
12.5 " |
31.8 cm |
| Feed Table Type |
Smooth Conveyor Belt Design |
|
| Feed Table Width |
15 " |
38.1 cm |
| Feed Table Length (long) |
6 ' |
1.8 m |
| Discharge |
| Discharge Height |
5.5 ' |
1.7 m |
| Trailer |
| Axle Rating |
7000 lbs |
3175.1 kg |
| Number of Axles |
1 |
|
| Tires |
LT245/75R16LRE |
|
| Hitch Type |
Pin, Pintle, Ball, 2-5/16" |
Ball, 5.9 cm |
| Stabilizer |
2000 lb Capacity Jack |
Features & Benefits
Feature: Hammermill and Screen Access
Benefit: Operators can load screens by hand without the use of additional support equipment or personnel. The lid also provides access to the hammermill for daily service, inspection, and replacement of cutters and hardware as recommended by the operator's maintenance manual.
Feature: Feed Conveyor
Benefit: Allows maximum material capacity to enhance machine productivity while lessening the amount of non-productive clean up under the grinder. Optional infeed extension available depending on application (i.e. hand feeding brush 48" table vs. regrinding chips where a 72" table provides more area for loader feeding).
Feature: Hammermill Drum
Benefit: This design offers optimum cutting performance of a wide variety of material with reduced maintenance. The drum has the ability to process light contaminates such as nails, small gravel/stone aggregates, bolts, glass fragments, and plastics that are commonly found in light C&D materials, pallets, or wood chips.
Feature: SmartFeed
Benefit: This exclusive system from Vermeer helps increase operator productivity and reduces strain on vital engine parts.
Feature: Side Discharge Conveyor
Benefit: A side discharge conveyor allows operators to leave the tow vehicle hooked up to the grinder - helping improve jobsite productivity and allowing operators to transport the grinder to the materials for processing. Another benefit gives operators the ability to load into dumpsters, pick-up trucks, or create windrows of processed materials.
Feature: Lightweight, Compact Design
Benefit: The unit can be towed using Class IV vehicle and its compact design allows for easy transport through residential areas. A lightweight design reduces ground disturbance in residential yards or golf courses.
Feature: Chips to Mulch
Benefit: Mulch is a value-added alternative to stockpiling wood chips, or paying disposal fees. Mulch can be marketed as landscape mulch, compost, animal bedding, or ground cover.
Feature: Clutchless PTO
Benefit: The clutchless PTO allows the mill to be engaged without sliding the engine or using a traditional slip clutch or idler pulley - helping prevent premature wear to drivetrain components.