Engine Idle Smoke Generator For Scx10 Traxxas Trx4 Redcat Rc Car

Description

1. Connect the signal line of the smoke emitter to the receiver, the red line – PWM signal; the black line – the positive pole of the receiver power supply. 2. Turn on the remote first, then turn on the receiver, otherwise the smoke generator may continue to spin after turning on the receiver until the remote is turned on. 3. Smoking machine working status description: after starting, the smoking machine is in standby state (not working); press the throttle lever, the smoker enters standby mode; the throttle lever goes up and descends, and the smoker’s speed also changes. After the throttle stick does not move for about 15 seconds, the smoke generator will enter standby state until the throttle stick is touched again. 4. The smoke generator is suitable for most models such as RC climbing cars, dump trucks, drift cars, boats, etc. Note: Supply quantity: 3-5 drops/hour. Do not add too much, because adding too much will lead to an unsatisfactory smoking effect. When the amount of smoke