GDS MedienTeam GmbH Bullet hole sticker set I 5 sheets of bullet hole as car sticker, for scooter moped motorcycle helmet laptop notebook smartphone

Description

Owner Installation Steps: 1. Clean the parts to be attached to the body and wipe with a clean cloth. Small sticker installation method: 2. Directly tear off the bottom paper of the sticker, stick it on the part to be glued, and scrape it off with a scraper (or credit card). 3. Finally, gently peel off the transfer film on the top of the sticker. Installation method for large stickers (stickers over 100cm): 2. Prepare a watering can and fill it with clean water with detergent (the role of the detergent is to lubricate and prevent you from moving when the position is bad.), a soft, clean towel, a heat gun (or a dryer). hair). 3. Evenly spray water with detergent on the part to be fixed to keep it moist. 4. Tear off the protective paper on the back of the sticker and stick it on the mounting piece. Since this is a large sticker, you need to stick one side first, then the other side. 5. Using the center of the sticker as a starting point, use a plastic scraper to scrape evenly in all