Water Oil Drill Pump, Electric Drill Bit Fuel Oil Diesel Pump, Self Priming Oil Drilling Fittings Fittings, for Aquarium Pond Statuary Fountain Garden

Description

[Material] -The electric borehole water pump is made of ABS and alloy. Has high hardness and good sealing. Please wipe with lubricating oil before each use, and rinse with clean water after use .When pumping abrasives and liquids containing solids, it is necessary to add a strainer to the inlet line for longer life. [High Performance] -The fuel pump operating temperature range is 5-49 degrees. The flow rate of the oil pump at 1500 rpm is 15 L per minute, and the flow rate of the oil pump at 3000 rpm is 30 L per minute. Note: The recommended speed is between 1500 and 3500. Before use, make sure that the hose at the inlet of the oil pump connector is sealed, and the length of the hose should not exceed 2.75 meters (9 feet). [How to use] -Our product is driven by an electric drill. After starting, check whether a certain fluid in the water inlet pipe is sucked into the pump within 15-20 seconds. If not, you need to check if the oil inlet pipe is properly installed on the oil inlet pump.